Box

Typedefs
typedef struct _Elm_Box_Transition	Elm_Box_Transition
	Opaque handler containing the parameters to perform an animated transition of the layout the box uses. More...

Functions
EOAPI void	elm_obj_box_homogeneous_set (Eina_Bool homogeneous)
	Set the box to arrange its children homogeneously. More...
EOAPI Eina_Bool	elm_obj_box_homogeneous_get (void)
	Get whether the box is using homogeneous mode or not ($true if it's homogeneous, false otherwise) More...
EOAPI void	elm_obj_box_align_set (double horizontal, double vertical)
	Set the alignment of the whole bounding box of contents. More...
EOAPI void	elm_obj_box_align_get (double *horizontal, double *vertical)
	Get the alignment of the whole bounding box of contents. More...
EOAPI void	elm_obj_box_horizontal_set (Eina_Bool horizontal)
	Set the horizontal orientation. More...
EOAPI Eina_Bool	elm_obj_box_horizontal_get (void)
	Get the horizontal orientation ($true if the box is set to horizontal mode, false otherwise) More...
EOAPI void	elm_obj_box_padding_set (Evas_Coord horizontal, Evas_Coord vertical)
	Set the space (padding) between the box's elements. More...
EOAPI void	elm_obj_box_padding_get (Evas_Coord *horizontal, Evas_Coord *vertical)
	Get the space (padding) between the box's elements. More...
EOAPI void	elm_obj_box_layout_set (Evas_Object_Box_Layout cb, const void *data, Ecore_Cb free_data)
	Set the layout defining function to be used by the box. More...
EOAPI Eina_List *	elm_obj_box_children_get (void)
	Get a list of the objects packed into the box. More...
EOAPI void	elm_obj_box_pack_end (Evas_Object *subobj)
	Add an object at the end of the pack list. More...
EOAPI void	elm_obj_box_unpack_all (void)
	Remove all items from the box, without deleting them. More...
EOAPI void	elm_obj_box_unpack (Evas_Object *subobj)
	Unpack a box item. More...
EOAPI void	elm_obj_box_pack_after (Evas_Object *subobj, Evas_Object *after)
	Adds an object to the box after the indicated object. More...
EOAPI void	elm_obj_box_pack_start (Evas_Object *subobj)
	Add an object to the beginning of the pack list. More...
EOAPI void	elm_obj_box_recalculate (void)
	Force the box to recalculate its children packing. More...
EOAPI void	elm_obj_box_pack_before (Evas_Object *subobj, Evas_Object *before)
	Adds an object to the box before the indicated object. More...
EOAPI void	elm_obj_box_clear (void)
	Clear the box of all children. More...
void	elm_box_homogeneous_set (Elm_Box *obj, Eina_Bool homogeneous)
	Set the box to arrange its children homogeneously. More...
Eina_Bool	elm_box_homogeneous_get (const Elm_Box *obj)
	Get whether the box is using homogeneous mode or not ($true if it's homogeneous, false otherwise) More...
void	elm_box_align_set (Elm_Box *obj, double horizontal, double vertical)
	Set the alignment of the whole bounding box of contents. More...
void	elm_box_align_get (const Elm_Box *obj, double *horizontal, double *vertical)
	Get the alignment of the whole bounding box of contents. More...
void	elm_box_horizontal_set (Elm_Box *obj, Eina_Bool horizontal)
	Set the horizontal orientation. More...
Eina_Bool	elm_box_horizontal_get (const Elm_Box *obj)
	Get the horizontal orientation ($true if the box is set to horizontal mode, false otherwise) More...
void	elm_box_padding_set (Elm_Box *obj, Evas_Coord horizontal, Evas_Coord vertical)
	Set the space (padding) between the box's elements. More...
void	elm_box_padding_get (const Elm_Box *obj, Evas_Coord *horizontal, Evas_Coord *vertical)
	Get the space (padding) between the box's elements. More...
void	elm_box_layout_set (Elm_Box *obj, Evas_Object_Box_Layout cb, const void *data, Ecore_Cb free_data)
	Set the layout defining function to be used by the box. More...
Eina_List *	elm_box_children_get (const Elm_Box *obj)
	Get a list of the objects packed into the box. More...
void	elm_box_pack_end (Elm_Box *obj, Evas_Object *subobj)
	Add an object at the end of the pack list. More...
void	elm_box_unpack_all (Elm_Box *obj)
	Remove all items from the box, without deleting them. More...
void	elm_box_unpack (Elm_Box *obj, Evas_Object *subobj)
	Unpack a box item. More...
void	elm_box_pack_after (Elm_Box *obj, Evas_Object *subobj, Evas_Object *after)
	Adds an object to the box after the indicated object. More...
void	elm_box_pack_start (Elm_Box *obj, Evas_Object *subobj)
	Add an object to the beginning of the pack list. More...
void	elm_box_recalculate (Elm_Box *obj)
	Force the box to recalculate its children packing. More...
void	elm_box_pack_before (Elm_Box *obj, Evas_Object *subobj, Evas_Object *before)
	Adds an object to the box before the indicated object. More...
void	elm_box_clear (Elm_Box *obj)
	Clear the box of all children. More...
void	elm_box_layout_transition (Evas_Object *obj, Evas_Object_Box_Data *priv, void *data)
	Special layout function that animates the transition from one layout to another. More...
Elm_Box_Transition *	elm_box_transition_new (const double duration, Evas_Object_Box_Layout start_layout, void *start_layout_data, Ecore_Cb start_layout_free_data, Evas_Object_Box_Layout end_layout, void *end_layout_data, Ecore_Cb end_layout_free_data, Ecore_Cb transition_end_cb, void *transition_end_data)
	Create a new Elm_Box_Transition to animate the switch of layouts. More...
void	elm_box_transition_free (void *data)
	Free a Elm_Box_Transition instance created with elm_box_transition_new(). More...
Evas_Object *	elm_box_add (Evas_Object *parent)
	Add a new box to the parent. More...

Detailed Description

A box arranges objects in a linear fashion, governed by a layout function that defines the details of this arrangement.

By default, the box will use an internal function to set the layout to a single row, either vertical or horizontal. This layout is affected by a number of parameters, such as the homogeneous flag set by elm_box_homogeneous_set(), the values given by elm_box_padding_set() and elm_box_align_set() and the hints set to each object in the box.

For this default layout, it's possible to change the orientation with elm_box_horizontal_set(). The box will start in the vertical orientation, placing its elements ordered from top to bottom. When horizontal is set, the order will go from left to right. If the box is set to be homogeneous, every object in it will be assigned the same space, that of the largest object. Padding can be used to set some spacing between the cell given to each object. The alignment of the box, set with elm_box_align_set(), determines how the bounding box of all the elements will be placed within the space given to the box widget itself.

The size hints of each object also affect how they are placed and sized within the box. evas_object_size_hint_min_set() will give the minimum size the object can have, and the box will use it as the basis for all latter calculations. Elementary widgets set their own minimum size as needed, so there's rarely any need to use it manually.

evas_object_size_hint_weight_set(), when not in homogeneous mode, is used to tell whether the object will be allocated the minimum size it needs or if the space given to it should be expanded. It's important to realize that expanding the size given to the object is not the same thing as resizing the object. It could very well end being a small widget floating in a much larger empty space. If not set, the weight for objects will normally be 0.0 for both axis, meaning the widget will not be expanded. To take as much space possible, set the weight to EVAS_HINT_EXPAND (defined to 1.0) for the desired axis to expand.

Besides how much space each object is allocated, it's possible to control how the widget will be placed within that space using evas_object_size_hint_align_set(). By default, this value will be 0.5 for both axis, meaning the object will be centered, but any value from 0.0 (left or top, for the x and y axis, respectively) to 1.0 (right or bottom) can be used. The special value EVAS_HINT_FILL, which is -1.0, means the object will be resized to fill the entire space it was allocated.

In addition, customized functions to define the layout can be set, which allow the application developer to organize the objects within the box in any number of ways.

The special elm_box_layout_transition() function can be used to switch from one layout to another, animating the motion of the children of the box.

Note

Objects should not be added to box objects using _add() calls.

Some examples on how to use boxes follow:

• Box - Basic API
• Box - Layout transitions

Typedef Documentation

Elm_Box_Transition

Opaque handler containing the parameters to perform an animated transition of the layout the box uses.

See also

elm_box_transition_new()

elm_box_layout_set()

elm_box_layout_transition()

Function Documentation

Evas_Object* elm_box_add

(

Evas_Object *

parent

)

Add a new box to the parent.

By default, the box will be in vertical mode and non-homogeneous.

Parameters

parent

The parent object

Returns

The new object or NULL if it cannot be created

void elm_box_align_get	(	const Elm_Box *	obj,
		double *	horizontal,
		double *	vertical
	)

Get the alignment of the whole bounding box of contents.

See also elm_box_align_set.

Parameters

[out]	horizontal	The horizontal alignment of elements
[out]	vertical	The vertical alignment of elements

References elm_obj_box_align_get().

void elm_box_align_set	(	Elm_Box *	obj,
		double	horizontal,
		double	vertical
	)

Set the alignment of the whole bounding box of contents.

Sets how the bounding box containing all the elements of the box, after their sizes and position has been calculated, will be aligned within the space given for the whole box widget.

Parameters

[in]	horizontal	The horizontal alignment of elements
[in]	vertical	The vertical alignment of elements

References elm_obj_box_align_set().

Eina_List* elm_box_children_get

(

const Elm_Box *

obj

)

Get a list of the objects packed into the box.

Returns a new list with a pointer to Evas_Object in its nodes. The order of the list corresponds to the packing order the box uses.

You must free this list with eina_list_free() once you are done with it.

References elm_obj_box_children_get().

void elm_box_clear

(

Elm_Box *

obj

)

Clear the box of all children.

Remove all the elements contained by the box, deleting the respective objects.

See also elm_box_unpack, elm_box_unpack_all.

References elm_obj_box_clear().

Referenced by elm_map_overlay_bubble_content_clear().

Eina_Bool elm_box_homogeneous_get

(

const Elm_Box *

obj

)

Get whether the box is using homogeneous mode or not ($true if it's homogeneous, false otherwise)

Returns

The homogeneous flag

References elm_obj_box_homogeneous_get().

void elm_box_homogeneous_set	(	Elm_Box *	obj,
		Eina_Bool	homogeneous
	)

Set the box to arrange its children homogeneously.

If enabled, homogeneous layout makes all items the same size, according to the size of the largest of its children.

Note

This flag is ignored if a custom layout function is set.

Parameters

[in]

homogeneous

The homogeneous flag

References elm_obj_box_homogeneous_set().

Eina_Bool elm_box_horizontal_get

(

const Elm_Box *

obj

)

Get the horizontal orientation ($true if the box is set to horizontal mode, false otherwise)

Returns

The horizontal flag

References elm_obj_box_horizontal_get().

void elm_box_horizontal_set	(	Elm_Box *	obj,
		Eina_Bool	horizontal
	)

Set the horizontal orientation.

By default, box object arranges their contents vertically from top to bottom. By calling this function with horizontal as true, the box will become horizontal, arranging contents from left to right.

Note

This flag is ignored if a custom layout function is set.

Parameters

[in]

horizontal

The horizontal flag

References elm_obj_box_horizontal_set().

void elm_box_layout_set	(	Elm_Box *	obj,
		Evas_Object_Box_Layout	cb,
		const void *	data,
		Ecore_Cb	free_data
	)

Set the layout defining function to be used by the box.

Whenever anything changes that requires the box in obj to recalculate the size and position of its elements, the function cb will be called to determine what the layout of the children will be.

Once a custom function is set, everything about the children layout is defined by it. The flags set by elm_box_horizontal_set and elm_box_homogeneous_set no longer have any meaning, and the values given by elm_box_padding_set and elm_box_align_set are up to this layout function to decide if they are used and how. These last two will be found in the priv parameter, of type Evas_Object_Box_Data, passed to cb. The Evas_Object the function receives is not the Elementary widget, but the internal Evas Box it uses, so none of the functions described here can be used on it.

Any of the layout functions in Evas can be used here, as well as the special elm_box_layout_transition.

The final data argument received by cb is the same data passed here, and the free_data function will be called to free it whenever the box is destroyed or another layout function is set.

Setting cb to null will revert back to the default layout function.

See also elm_box_layout_transition.

Parameters

[in]	cb	The callback function used for layout
[in]	data	Data that will be passed to layout function
[in]	free_data	Function called to free data

References elm_obj_box_layout_set().

void elm_box_layout_transition	(	Evas_Object *	obj,
		Evas_Object_Box_Data *	priv,
		void *	data
	)

Special layout function that animates the transition from one layout to another.

Normally, when switching the layout function for a box, this will be reflected immediately on screen on the next render, but it's also possible to do this through an animated transition.

This is done by creating an Elm_Box_Transition and setting the box layout to this function.

For example:

Elm_Box_Transition *t = elm_box_transition_new(1.0,
                           evas_object_box_layout_vertical, // start
                           NULL, // data for initial layout
                           NULL, // free function for initial data
                           evas_object_box_layout_horizontal, // end
                           NULL, // data for final layout
                           NULL, // free function for final data
                           anim_end, // will be called when animation ends
                           NULL); // data for anim_end function\
elm_box_layout_set(box, elm_box_layout_transition, t,
                   elm_box_transition_free);

Note

This function can only be used with elm_box_layout_set(). Calling it directly will not have the expected results.

See also

elm_box_transition_new

elm_box_transition_free

elm_box_layout_set

void elm_box_pack_after	(	Elm_Box *	obj,
		Evas_Object *	subobj,
		Evas_Object *	after
	)

Adds an object to the box after the indicated object.

This will add the subobj to the box indicated after the object indicated with after. If after is not already in the box, results are undefined. After means either to the right of the indicated object or below it depending on orientation.

See also elm_box_pack_start, elm_box_pack_end, elm_box_pack_before, elm_box_unpack, elm_box_unpack_all, elm_box_clear.

Parameters

[in]

after

The object after which to add it

References elm_obj_box_pack_after().

void elm_box_pack_before	(	Elm_Box *	obj,
		Evas_Object *	subobj,
		Evas_Object *	before
	)

Adds an object to the box before the indicated object.

This will add the subobj to the box indicated before the object indicated with before. If before is not already in the box, results are undefined. Before means either to the left of the indicated object or above it depending on orientation.

See also elm_box_pack_start, elm_box_pack_end, elm_box_pack_after, elm_box_unpack, elm_box_unpack_all, elm_box_clear.

Parameters

[in]

before

The object before which to add it

References elm_obj_box_pack_before().

void elm_box_pack_end	(	Elm_Box *	obj,
		Evas_Object *	subobj
	)

Add an object at the end of the pack list.

Pack subobj into the box obj, placing it last in the list of children objects. The actual position the object will get on screen depends on the layout used. If no custom layout is set, it will be at the bottom or right, depending if the box is vertical or horizontal, respectively.

See also elm_box_pack_start, elm_box_pack_before, elm_box_pack_after, elm_box_unpack, elm_box_unpack_all, elm_box_clear.

Parameters

[in]

subobj

The object to add to the box

References elm_obj_box_pack_end().

Referenced by elm_map_overlay_bubble_content_append().

void elm_box_pack_start	(	Elm_Box *	obj,
		Evas_Object *	subobj
	)

Add an object to the beginning of the pack list.

Pack subobj into the box obj, placing it first in the list of children objects. The actual position the object will get on screen depends on the layout used. If no custom layout is set, it will be at the top or left, depending if the box is vertical or horizontal, respectively.

See also elm_box_pack_end, elm_box_pack_before, elm_box_pack_after, elm_box_unpack, elm_box_unpack_all, elm_box_clear.

Parameters

[in]

subobj

The object to add to the box

References elm_obj_box_pack_start().

void elm_box_padding_get	(	const Elm_Box *	obj,
		Evas_Coord *	horizontal,
		Evas_Coord *	vertical
	)

Get the space (padding) between the box's elements.

See also elm_box_padding_set.

Parameters

[out]	horizontal	The horizontal space between elements
[out]	vertical	The vertical space between elements

References elm_obj_box_padding_get().

void elm_box_padding_set	(	Elm_Box *	obj,
		Evas_Coord	horizontal,
		Evas_Coord	vertical
	)

Set the space (padding) between the box's elements.

Extra space in pixels that will be added between a box child and its neighbors after its containing cell has been calculated. This padding is set for all elements in the box, besides any possible padding that individual elements may have through their size hints.

Parameters

[in]	horizontal	The horizontal space between elements
[in]	vertical	The vertical space between elements

References elm_obj_box_padding_set().

void elm_box_recalculate

(

Elm_Box *

obj

)

Force the box to recalculate its children packing.

If any children was added or removed, box will not calculate the values immediately rather leaving it to the next main loop iteration. While this is great as it would save lots of recalculation, whenever you need to get the position of a just added item you must force recalculate before doing so.

References elm_obj_box_recalculate().

void elm_box_transition_free

(

void *

data

)

Free a Elm_Box_Transition instance created with elm_box_transition_new().

This function is mostly useful as the free_data parameter in elm_box_layout_set() when elm_box_layout_transition().

Parameters

data	The Elm_Box_Transition instance to be freed.

See also

elm_box_transition_new

elm_box_layout_transition

Elm_Box_Transition* elm_box_transition_new	(	const double	duration,
		Evas_Object_Box_Layout	start_layout,
		void *	start_layout_data,
		Ecore_Cb	start_layout_free_data,
		Evas_Object_Box_Layout	end_layout,
		void *	end_layout_data,
		Ecore_Cb	end_layout_free_data,
		Ecore_Cb	transition_end_cb,
		void *	transition_end_data
	)

Create a new Elm_Box_Transition to animate the switch of layouts.

If you want to animate the change from one layout to another, you need to set the layout function of the box to elm_box_layout_transition(), passing as user data to it an instance of Elm_Box_Transition with the necessary information to perform this animation. The free function to set for the layout is elm_box_transition_free().

The parameters to create an Elm_Box_Transition sum up to how long will it be, in seconds, a layout function to describe the initial point, another for the final position of the children and one function to be called when the whole animation ends. This last function is useful to set the definitive layout for the box, usually the same as the end layout for the animation, but could be used to start another transition.

Parameters

duration	The duration of the transition in seconds
start_layout	The layout function that will be used to start the animation
start_layout_data	The data to be passed the start_layout function
start_layout_free_data	Function to free start_layout_data
end_layout	The layout function that will be used to end the animation
end_layout_data	Data param passed to end_layout
end_layout_free_data	The data to be passed the end_layout function
end_layout_free_data	Function to free end_layout_data
transition_end_cb	Callback function called when animation ends
transition_end_data	Data to be passed to transition_end_cb

Returns

An instance of Elm_Box_Transition

See also

elm_box_transition_new

elm_box_layout_transition

void elm_box_unpack	(	Elm_Box *	obj,
		Evas_Object *	subobj
	)

Unpack a box item.

Remove the object given by subobj from the box obj without deleting it.

See also elm_box_unpack_all, elm_box_clear.

Parameters

[in]

subobj

The object to unpack

References elm_obj_box_unpack().

void elm_box_unpack_all

(

Elm_Box *

obj

)

Remove all items from the box, without deleting them.

Clear the box from all children, but don't delete the respective objects. If no other references of the box children exist, the objects will never be deleted, and thus the application will leak the memory. Make sure when using this function that you hold a reference to all the objects in the box obj.

See also elm_box_clear, elm_box_unpack.

References elm_obj_box_unpack_all().

EOAPI void elm_obj_box_align_get	(	double *	horizontal,
		double *	vertical
	)

Get the alignment of the whole bounding box of contents.

See also elm_obj_box_align_set.

Parameters

[out]	horizontal	The horizontal alignment of elements
[out]	vertical	The vertical alignment of elements

Referenced by elm_box_align_get().

EOAPI void elm_obj_box_align_set	(	double	horizontal,
		double	vertical
	)

Set the alignment of the whole bounding box of contents.

Sets how the bounding box containing all the elements of the box, after their sizes and position has been calculated, will be aligned within the space given for the whole box widget.

Parameters

[in]	horizontal	The horizontal alignment of elements
[in]	vertical	The vertical alignment of elements

Referenced by elm_box_align_set().

EOAPI Eina_List* elm_obj_box_children_get

(

void

)

Get a list of the objects packed into the box.

Returns a new list with a pointer to Evas_Object in its nodes. The order of the list corresponds to the packing order the box uses.

You must free this list with eina_list_free() once you are done with it.

Referenced by elm_box_children_get().

EOAPI void elm_obj_box_clear

(

void

)

Clear the box of all children.

Remove all the elements contained by the box, deleting the respective objects.

See also elm_obj_box_unpack, elm_obj_box_unpack_all.

Referenced by elm_box_clear().

EOAPI Eina_Bool elm_obj_box_homogeneous_get

(

void

)

Get whether the box is using homogeneous mode or not ($true if it's homogeneous, false otherwise)

Returns

The homogeneous flag

Referenced by elm_box_homogeneous_get().

EOAPI void elm_obj_box_homogeneous_set

(

Eina_Bool

homogeneous

)

Set the box to arrange its children homogeneously.

If enabled, homogeneous layout makes all items the same size, according to the size of the largest of its children.

Note

This flag is ignored if a custom layout function is set.

Parameters

[in]

homogeneous

The homogeneous flag

Referenced by elm_box_homogeneous_set().

EOAPI Eina_Bool elm_obj_box_horizontal_get

(

void

)

Get the horizontal orientation ($true if the box is set to horizontal mode, false otherwise)

Returns

The horizontal flag

Referenced by elm_box_horizontal_get().

EOAPI void elm_obj_box_horizontal_set

(

Eina_Bool

horizontal

)

Set the horizontal orientation.

By default, box object arranges their contents vertically from top to bottom. By calling this function with horizontal as true, the box will become horizontal, arranging contents from left to right.

Note

This flag is ignored if a custom layout function is set.

Parameters

[in]

horizontal

The horizontal flag

Referenced by elm_box_horizontal_set().

EOAPI void elm_obj_box_layout_set	(	Evas_Object_Box_Layout	cb,
		const void *	data,
		Ecore_Cb	free_data
	)

Set the layout defining function to be used by the box.

Whenever anything changes that requires the box in obj to recalculate the size and position of its elements, the function cb will be called to determine what the layout of the children will be.

Once a custom function is set, everything about the children layout is defined by it. The flags set by elm_obj_box_horizontal_set and elm_obj_box_homogeneous_set no longer have any meaning, and the values given by elm_obj_box_padding_set and elm_obj_box_align_set are up to this layout function to decide if they are used and how. These last two will be found in the priv parameter, of type Evas_Object_Box_Data, passed to cb. The Evas_Object the function receives is not the Elementary widget, but the internal Evas Box it uses, so none of the functions described here can be used on it.

Any of the layout functions in Evas can be used here, as well as the special elm_box_layout_transition.

The final data argument received by cb is the same data passed here, and the free_data function will be called to free it whenever the box is destroyed or another layout function is set.

Setting cb to null will revert back to the default layout function.

See also elm_box_layout_transition.

Parameters

[in]	cb	The callback function used for layout
[in]	data	Data that will be passed to layout function
[in]	free_data	Function called to free data

Referenced by elm_box_layout_set().

EOAPI void elm_obj_box_pack_after	(	Evas_Object *	subobj,
		Evas_Object *	after
	)

Adds an object to the box after the indicated object.

This will add the subobj to the box indicated after the object indicated with after. If after is not already in the box, results are undefined. After means either to the right of the indicated object or below it depending on orientation.

See also elm_obj_box_pack_start, elm_obj_box_pack_end, elm_obj_box_pack_before, elm_obj_box_unpack, elm_obj_box_unpack_all, elm_obj_box_clear.

Parameters

[in]

after

The object after which to add it

Referenced by elm_box_pack_after().

EOAPI void elm_obj_box_pack_before	(	Evas_Object *	subobj,
		Evas_Object *	before
	)

Adds an object to the box before the indicated object.

This will add the subobj to the box indicated before the object indicated with before. If before is not already in the box, results are undefined. Before means either to the left of the indicated object or above it depending on orientation.

See also elm_obj_box_pack_start, elm_obj_box_pack_end, elm_obj_box_pack_after, elm_obj_box_unpack, elm_obj_box_unpack_all, elm_obj_box_clear.

Parameters

[in]

before

The object before which to add it

Referenced by elm_box_pack_before().

EOAPI void elm_obj_box_pack_end

(

Evas_Object *

subobj

)

Add an object at the end of the pack list.

Pack subobj into the box obj, placing it last in the list of children objects. The actual position the object will get on screen depends on the layout used. If no custom layout is set, it will be at the bottom or right, depending if the box is vertical or horizontal, respectively.

See also elm_obj_box_pack_start, elm_obj_box_pack_before, elm_obj_box_pack_after, elm_obj_box_unpack, elm_obj_box_unpack_all, elm_obj_box_clear.

Parameters

[in]

subobj

The object to add to the box

Referenced by elm_box_pack_end().

EOAPI void elm_obj_box_pack_start

(

Evas_Object *

subobj

)

Add an object to the beginning of the pack list.

Pack subobj into the box obj, placing it first in the list of children objects. The actual position the object will get on screen depends on the layout used. If no custom layout is set, it will be at the top or left, depending if the box is vertical or horizontal, respectively.

See also elm_obj_box_pack_end, elm_obj_box_pack_before, elm_obj_box_pack_after, elm_obj_box_unpack, elm_obj_box_unpack_all, elm_obj_box_clear.

Parameters

[in]

subobj

The object to add to the box

Referenced by elm_box_pack_start().

EOAPI void elm_obj_box_padding_get	(	Evas_Coord *	horizontal,
		Evas_Coord *	vertical
	)

Get the space (padding) between the box's elements.

See also elm_obj_box_padding_set.

Parameters

[out]	horizontal	The horizontal space between elements
[out]	vertical	The vertical space between elements

Referenced by elm_box_padding_get().

EOAPI void elm_obj_box_padding_set	(	Evas_Coord	horizontal,
		Evas_Coord	vertical
	)

Set the space (padding) between the box's elements.

Extra space in pixels that will be added between a box child and its neighbors after its containing cell has been calculated. This padding is set for all elements in the box, besides any possible padding that individual elements may have through their size hints.

Parameters

[in]	horizontal	The horizontal space between elements
[in]	vertical	The vertical space between elements

Referenced by elm_box_padding_set().

EOAPI void elm_obj_box_recalculate

(

void

)

Force the box to recalculate its children packing.

If any children was added or removed, box will not calculate the values immediately rather leaving it to the next main loop iteration. While this is great as it would save lots of recalculation, whenever you need to get the position of a just added item you must force recalculate before doing so.

Referenced by elm_box_recalculate().

EOAPI void elm_obj_box_unpack

(

Evas_Object *

subobj

)

Unpack a box item.

Remove the object given by subobj from the box obj without deleting it.

See also elm_obj_box_unpack_all, elm_obj_box_clear.

Parameters

[in]

subobj

The object to unpack

Referenced by elm_box_unpack().

EOAPI void elm_obj_box_unpack_all

(

void

)

Remove all items from the box, without deleting them.

Clear the box from all children, but don't delete the respective objects. If no other references of the box children exist, the objects will never be deleted, and thus the application will leak the memory. Make sure when using this function that you hold a reference to all the objects in the box obj.

See also elm_obj_box_clear, elm_obj_box_unpack.

Referenced by elm_box_unpack_all().