Eet Data Serialization
Convenience functions to serialize and parse complex data structures to binary blobs. More...
Data Structures | |
struct | _Eet_Data_Descriptor_Class |
Instructs Eet about memory management for different needs under serialization and parse process. More... | |
Modules | |
Eet Data Serialization using A Ciphers | |
Most of the Eet Data Serialization have alternative versions that accounts for ciphers to protect their content. | |
Defines | |
#define | EET_T_UNKNOW 0 |
Unknown data encoding type. | |
#define | EET_T_CHAR 1 |
Data type: char. | |
#define | EET_T_SHORT 2 |
Data type: short. | |
#define | EET_T_INT 3 |
Data type: int. | |
#define | EET_T_LONG_LONG 4 |
Data type: long long. | |
#define | EET_T_FLOAT 5 |
Data type: float. | |
#define | EET_T_DOUBLE 6 |
Data type: double. | |
#define | EET_T_UCHAR 7 |
Data type: unsigned char. | |
#define | EET_T_USHORT 8 |
Data type: unsigned short. | |
#define | EET_T_UINT 9 |
Data type: unsigned int. | |
#define | EET_T_ULONG_LONG 10 |
Data type: unsigned long long. | |
#define | EET_T_STRING 11 |
Data type: char *. | |
#define | EET_T_INLINED_STRING 12 |
Data type: char * (but compressed inside the resulting eet). | |
#define | EET_T_NULL 13 |
Data type: (void *) (only use it if you know why). | |
#define | EET_T_F32P32 14 |
Data type: fixed point 32.32. | |
#define | EET_T_F16P16 15 |
Data type: fixed point 16.16. | |
#define | EET_T_F8P24 16 |
Data type: fixed point 8.24. | |
#define | EET_T_LAST 18 |
Last data type. | |
#define | EET_G_UNKNOWN 100 |
Unknown group data encoding type. | |
#define | EET_G_ARRAY 101 |
Fixed size array group type. | |
#define | EET_G_VAR_ARRAY 102 |
Variable size array group type. | |
#define | EET_G_LIST 103 |
Linked list group type. | |
#define | EET_G_HASH 104 |
Hash table group type. | |
#define | EET_G_UNION 105 |
Union group type. | |
#define | EET_G_VARIANT 106 |
Selectable subtype group. | |
#define | EET_G_LAST 107 |
Last group type. | |
#define | EET_I_LIMIT 128 |
Other type exist but are reserved for internal purpose. | |
#define | EET_DATA_DESCRIPTOR_CLASS_VERSION 4 |
The version of Eet_Data_Descriptor_Class at the time of the distribution of the sources. | |
#define | EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(clas, type) (eet_eina_stream_data_descriptor_class_set(clas, sizeof (*(clas)), # type, sizeof(type))) |
This macro is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with stream. | |
#define | EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET(clas, type) (eet_eina_file_data_descriptor_class_set(clas, sizeof (*(clas)), # type, sizeof(type))) |
This macro is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with file. | |
#define | EET_DATA_DESCRIPTOR_ADD_BASIC(edd, struct_type, name, member, type) |
Add a basic data element to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_SUB(edd, struct_type, name, member, subtype) |
Add a sub-element type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_LIST(edd, struct_type, name, member, subtype) |
Add a linked list type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_HASH(edd, struct_type, name, member, subtype) |
Add a hash type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_HASH_STRING(edd, struct_type, name, member) |
Add a hash of string to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_ARRAY(edd, struct_type, name, member, subtype) |
Add a fixed size array type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY(edd, struct_type, name, member, subtype) |
Add a variable size array type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY_STRING(edd, struct_type, name, member) |
Add a variable size array type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_UNION(edd, struct_type, name, member, type_member, unified_type) |
Add an union type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_VARIANT(edd, struct_type, name, member, type_member, unified_type) |
Add a automatically selectable type to a data descriptor. | |
#define | EET_DATA_DESCRIPTOR_ADD_MAPPING(unified_type, name, subtype) |
Add a mapping to a data descriptor that will be used by union, variant or inherited type. | |
Typedefs | |
typedef struct _Eet_Data_Descriptor | Eet_Data_Descriptor |
Opaque handle that have information on a type members. | |
typedef struct _Eet_Data_Descriptor_Class | Eet_Data_Descriptor_Class |
Instructs Eet about memory management for different needs under serialization and parse process. | |
Functions | |
EINA_DEPRECATED EAPI Eet_Data_Descriptor * | eet_data_descriptor_new (const char *name, int size, Eet_Descriptor_List_Next_Callback func_list_next, Eet_Descriptor_List_Append_Callback func_list_append, Eet_Descriptor_List_Data_Callback func_list_data, Eet_Descriptor_List_Free_Callback func_list_free, Eet_Descriptor_Hash_Foreach_Callback func_hash_foreach, Eet_Descriptor_Hash_Add_Callback func_hash_add, Eet_Descriptor_Hash_Free_Callback func_hash_free) |
Create a new empty data structure descriptor. | |
EAPI Eet_Data_Descriptor * | eet_data_descriptor_stream_new (const Eet_Data_Descriptor_Class *eddc) |
This function creates a new data descriptore and returns a handle to the new data descriptor. | |
EAPI Eet_Data_Descriptor * | eet_data_descriptor_file_new (const Eet_Data_Descriptor_Class *eddc) |
This function creates a new data descriptore and returns a handle to the new data descriptor. | |
EAPI Eina_Bool | eet_eina_stream_data_descriptor_class_set (Eet_Data_Descriptor_Class *eddc, unsigned int eddc_size, const char *name, int size) |
This function is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with a stream. | |
EAPI Eina_Bool | eet_eina_file_data_descriptor_class_set (Eet_Data_Descriptor_Class *eddc, unsigned int eddc_size, const char *name, int size) |
This function is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with a file. | |
EAPI void | eet_data_descriptor_free (Eet_Data_Descriptor *edd) |
This function frees a data descriptor when it is not needed anymore. | |
EAPI void | eet_data_descriptor_element_add (Eet_Data_Descriptor *edd, const char *name, int type, int group_type, int offset, int count, const char *counter_name, Eet_Data_Descriptor *subtype) |
This function is an internal used by macros. | |
EAPI void * | eet_data_read (Eet_File *ef, Eet_Data_Descriptor *edd, const char *name) |
Read a data structure from an eet file and decodes it. | |
EAPI int | eet_data_write (Eet_File *ef, Eet_Data_Descriptor *edd, const char *name, const void *data, int compress) |
Write a data structure from memory and store in an eet file. | |
EAPI int | eet_data_text_dump (const void *data_in, int size_in, Eet_Dump_Callback dumpfunc, void *dumpdata) |
Dump an eet encoded data structure into ascii text. | |
EAPI void * | eet_data_text_undump (const char *text, int textlen, int *size_ret) |
Take an ascii encoding from eet_data_text_dump() and re-encode in binary. | |
EAPI int | eet_data_dump (Eet_File *ef, const char *name, Eet_Dump_Callback dumpfunc, void *dumpdata) |
Dump an eet encoded data structure from an eet file into ascii text. | |
EAPI int | eet_data_undump (Eet_File *ef, const char *name, const char *text, int textlen, int compress) |
Take an ascii encoding from eet_data_dump() and re-encode in binary. | |
EAPI void * | eet_data_descriptor_decode (Eet_Data_Descriptor *edd, const void *data_in, int size_in) |
Decode a data structure from an arbitrary location in memory. | |
EAPI void * | eet_data_descriptor_encode (Eet_Data_Descriptor *edd, const void *data_in, int *size_ret) |
Encode a dsata struct to memory and return that encoded data. |
Detailed Description
Convenience functions to serialize and parse complex data structures to binary blobs.
While Eet core just handles binary blobs, it is often required to save some structured data of different types, such as strings, integers, lists, hashes and so on.
Eet can serialize and then parse data types given some construction instructions. These are defined in two levels:
- Eet_Data_Descriptor_Class to tell generic memory handling, such as the size of the type, how to allocate memory, strings, lists, hashes and so on.
- Eet_Data_Descriptor to tell inside such type, the members and their offsets inside the memory blob, their types and names. These members can be simple types or other Eet_Data_Descriptor, allowing hierarchical types to be defined.
Given that C provides no introspection, this process can be quite cumbersome, so we provide lots of macros and convenience functions to aid creating the types.
Example:
#include <Eet.h> #include <Evas.h> typedef struct _blah2 { char *string; } Blah2; typedef struct _blah3 { char *string; } Blah3; typedef struct _blah { char character; short sixteen; int integer; long long lots; float floating; double floating_lots; char *string; Blah2 *blah2; Eina_List *blah3; } Blah; int main(int argc, char **argv) { Blah blah; Blah2 blah2; Blah3 blah3; Eet_Data_Descriptor *edd, *edd2, *edd3; Eet_Data_Descriptor_Class eddc, eddc2, eddc3; void *data; int size; FILE *f; Blah *blah_in; eet_init(); EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc3, Blah3); edd3 = eet_data_descriptor_stream_new(&eddc3); EET_DATA_DESCRIPTOR_ADD_BASIC(edd3, Blah3, "string3", string, EET_T_STRING); EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc2, Blah2); edd2 = eet_data_descriptor_stream_new(&eddc2); EET_DATA_DESCRIPTOR_ADD_BASIC(edd2, Blah2, "string2", string, EET_T_STRING); EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET(&eddc, Blah); edd = eet_data_descriptor_stream_new(&eddc); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "character", character, EET_T_CHAR); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "sixteen", sixteen, EET_T_SHORT); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "integer", integer, EET_T_INT); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "lots", lots, EET_T_LONG_LONG); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "floating", floating, EET_T_FLOAT); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "floating_lots", floating_lots, EET_T_DOUBLE); EET_DATA_DESCRIPTOR_ADD_BASIC(edd, Blah, "string", string, EET_T_STRING); EET_DATA_DESCRIPTOR_ADD_SUB(edd, Blah, "blah2", blah2, edd2); EET_DATA_DESCRIPTOR_ADD_LIST(edd, Blah, "blah3", blah3, edd3); blah3.string = "PANTS"; blah2.string = "subtype string here!"; blah.character = '7'; blah.sixteen = 0x7777; blah.integer = 0xc0def00d; blah.lots = 0xdeadbeef31337777; blah.floating = 3.141592654; blah.floating_lots = 0.777777777777777; blah.string = "bite me like a turnip"; blah.blah2 = &blah2; blah.blah3 = eina_list_append(NULL, &blah3); blah.blah3 = eina_list_append(blah.blah3, &blah3); blah.blah3 = eina_list_append(blah.blah3, &blah3); blah.blah3 = eina_list_append(blah.blah3, &blah3); blah.blah3 = eina_list_append(blah.blah3, &blah3); blah.blah3 = eina_list_append(blah.blah3, &blah3); blah.blah3 = eina_list_append(blah.blah3, &blah3); data = eet_data_descriptor_encode(edd, &blah, &size); printf("-----DECODING\n"); blah_in = eet_data_descriptor_decode(edd, data, size); printf("-----DECODED!\n"); printf("%c\n", blah_in->character); printf("%x\n", (int)blah_in->sixteen); printf("%x\n", blah_in->integer); printf("%lx\n", blah_in->lots); printf("%f\n", (double)blah_in->floating); printf("%f\n", (double)blah_in->floating_lots); printf("%s\n", blah_in->string); printf("%p\n", blah_in->blah2); printf(" %s\n", blah_in->blah2->string); { Eina_List *l; Blah3 *blah3_in; EINA_LIST_FOREACH(blah_in->blah3, l, blah3_in) { printf("%p\n", blah3_in); printf(" %s\n", blah3_in->string); } } eet_data_descriptor_free(edd); eet_data_descriptor_free(edd2); eet_data_descriptor_free(edd3); eet_shutdown(); return 0; }
Define Documentation
#define EET_DATA_DESCRIPTOR_ADD_ARRAY | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
subtype | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_ARRAY, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ /* 0, */ sizeof(___ett.member) / \ sizeof(___ett.member[0]), NULL, subtype); \ } while (0)
Add a fixed size array type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. subtype The type of hash member to add.
This macro lets you easily add a fixed size array of other data types. All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the subtype
being the exception. This must be the data descriptor of the element that is in each member of the hash to be stored.
- Since:
- 1.0.2
#define EET_DATA_DESCRIPTOR_ADD_BASIC | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
type | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, type, EET_G_UNKNOWN, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ 0, /* 0, */ NULL, NULL); \ } while(0)
Add a basic data element to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. type The type of the member to encode.
This macro is a convenience macro provided to add a member to the data descriptor edd
. The type of the structure is provided as the struct_type
parameter (for example: struct my_struct). The name
parameter defines a string that will be used to uniquely name that member of the struct (it is suggested to use the struct member itself). The member
parameter is the actual struct member itself (for eet_dictionary_string_check example: values), and type
is the basic data type of the member which must be one of: EET_T_CHAR, EET_T_SHORT, EET_T_INT, EET_T_LONG_LONG, EET_T_FLOAT, EET_T_DOUBLE, EET_T_UCHAR, EET_T_USHORT, EET_T_UINT, EET_T_ULONG_LONG or EET_T_STRING.
- Since:
- 1.0.0
#define EET_DATA_DESCRIPTOR_ADD_HASH | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
subtype | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_HASH, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ 0, /* 0, */ NULL, subtype); \ } while (0)
Add a hash type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. subtype The type of hash member to add.
This macro lets you easily add a hash of other data types. All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the subtype
being the exception. This must be the data descriptor of the element that is in each member of the hash to be stored.
- Since:
- 1.0.0
#define EET_DATA_DESCRIPTOR_ADD_HASH_STRING | ( | edd, | |||
struct_type, | |||||
name, | |||||
member | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_STRING, EET_G_HASH, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ 0, /* 0, */ NULL, NULL); \ } while (0)
Add a hash of string to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded.
This macro lets you easily add a hash of string. All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC().
- Since:
- 1.3.4
#define EET_DATA_DESCRIPTOR_ADD_LIST | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
subtype | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_LIST, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ 0, /* 0, */ NULL, subtype); \ } while (0)
Add a linked list type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. subtype The type of linked list member to add.
This macro lets you easily add a linked list of other data types. All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the subtype
being the exception. This must be the data descriptor of the element that is in each member of the linked list to be stored.
- Since:
- 1.0.0
#define EET_DATA_DESCRIPTOR_ADD_MAPPING | ( | unified_type, | |||
name, | |||||
subtype | ) |
eet_data_descriptor_element_add(unified_type, \ name, \ EET_T_UNKNOW, \ EET_G_UNKNOWN, \ 0, \ 0, \ NULL, \ subtype)
Add a mapping to a data descriptor that will be used by union, variant or inherited type.
- Parameters:
-
unified_type The data descriptor to add the mapping to. name The string name to get/set type. subtype The matching data descriptor.
- Since:
- 1.2.4
- See also:
- Eet_Data_Descriptor_Class
#define EET_DATA_DESCRIPTOR_ADD_SUB | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
subtype | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_UNKNOWN, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ 0, /* 0, */ NULL, subtype); \ } while (0)
Add a sub-element type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. subtype The type of sub-type struct to add.
This macro lets you easily add a sub-type (a struct that's pointed to by this one). All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the subtype
being the exception. This must be the data descriptor of the struct that is pointed to by this element.
- Since:
- 1.0.0
#define EET_DATA_DESCRIPTOR_ADD_UNION | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
type_member, | |||||
unified_type | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_UNION, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ (char *)(& (___ett.type_member)) - \ (char *)(& (___ett)), \ NULL, unified_type); \ } while (0)
Add an union type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. type_member The member that give hints on what is in the union. unified_type Describe all possible type the union could handle.
This macro lets you easily add an union with a member that specify what is inside. The unified_type
is an Eet_Data_Descriptor, but only the entry that match the name returned by type_get will be used for each serialized data. The type_get and type_set callback of unified_type should be defined.
- Since:
- 1.2.4
- See also:
- Eet_Data_Descriptor_Class
#define EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
subtype | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, \ name, \ EET_T_UNKNOW, \ EET_G_VAR_ARRAY, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ (char *)(& (___ett.member ## _count)) - \ (char *)(& (___ett)), \ /* 0, */ NULL, \ subtype); \ } while (0)
Add a variable size array type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. subtype The type of hash member to add.
This macro lets you easily add a fixed size array of other data types. All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC(), with the subtype
being the exception. This must be the data descriptor of the element that is in each member of the hash to be stored.
- Since:
- 1.0.2
#define EET_DATA_DESCRIPTOR_ADD_VAR_ARRAY_STRING | ( | edd, | |||
struct_type, | |||||
name, | |||||
member | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, \ name, \ EET_T_STRING, \ EET_G_VAR_ARRAY, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ (char *)(& (___ett.member ## _count)) - \ (char *)(& (___ett)), \ /* 0, */ NULL, \ NULL); \ } while (0)
Add a variable size array type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded.
This macro lets you easily add a fixed size array of string. All the parameters are the same as for EET_DATA_DESCRIPTOR_ADD_BASIC().
- Since:
- 1.4.0
#define EET_DATA_DESCRIPTOR_ADD_VARIANT | ( | edd, | |||
struct_type, | |||||
name, | |||||
member, | |||||
type_member, | |||||
unified_type | ) |
do { \ struct_type ___ett; \ eet_data_descriptor_element_add(edd, name, EET_T_UNKNOW, EET_G_VARIANT, \ (char *)(& (___ett.member)) - \ (char *)(& (___ett)), \ (char *)(& (___ett.type_member)) - \ (char *)(& (___ett)), \ NULL, unified_type); \ } while (0)
Add a automatically selectable type to a data descriptor.
- Parameters:
-
edd The data descriptor to add the type to. struct_type The type of the struct. name The string name to use to encode/decode this member (must be a constant global and never change). member The struct member itself to be encoded. type_member The member that give hints on what is in the union. unified_type Describe all possible type the union could handle.
This macro lets you easily define what the content of member
points to depending of the content of type_member
. The type_get and type_set callback of unified_type should be defined. If the the type is not know at the time of restoring it, eet will still call type_set of unified_type
but the pointer will be set to a serialized binary representation of what eet know. This make it possible, to save this pointer again by just returning the string given previously and telling it by setting unknow to EINA_TRUE.
- Since:
- 1.2.4
- See also:
- Eet_Data_Descriptor_Class
#define EET_DATA_DESCRIPTOR_CLASS_VERSION 4 |
The version of Eet_Data_Descriptor_Class at the time of the distribution of the sources.
One should define this to its version member so it is compatible with abi changes, or at least will not crash with them.
Referenced by eet_eina_file_data_descriptor_class_set(), and eet_eina_stream_data_descriptor_class_set().
#define EET_EINA_FILE_DATA_DESCRIPTOR_CLASS_SET | ( | clas, | |||
type | ) | (eet_eina_file_data_descriptor_class_set(clas, sizeof (*(clas)), # type, sizeof(type))) |
This macro is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with file.
- Parameters:
-
clas The Eet_Data_Descriptor_Class you want to set. type The type of the structure described by this class.
- Returns:
- EINA_TRUE if the structure was correctly set (The only reason that could make it fail is if you did give wrong parameter).
- Since:
- 1.2.3
#define EET_EINA_STREAM_DATA_DESCRIPTOR_CLASS_SET | ( | clas, | |||
type | ) | (eet_eina_stream_data_descriptor_class_set(clas, sizeof (*(clas)), # type, sizeof(type))) |
This macro is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with stream.
- Parameters:
-
clas The Eet_Data_Descriptor_Class you want to set. type The type of the structure described by this class.
- Returns:
- EINA_TRUE if the structure was correctly set (The only reason that could make it fail is if you did give wrong parameter).
- Since:
- 1.2.3
#define EET_I_LIMIT 128 |
Other type exist but are reserved for internal purpose.
Typedef Documentation
Opaque handle that have information on a type members.
The members are added by means of EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB(), EET_DATA_DESCRIPTOR_ADD_LIST(), EET_DATA_DESCRIPTOR_ADD_HASH() or eet_data_descriptor_element_add().
Function Documentation
EAPI void* eet_data_descriptor_decode | ( | Eet_Data_Descriptor * | edd, | |
const void * | data_in, | |||
int | size_in | |||
) |
Decode a data structure from an arbitrary location in memory.
- Parameters:
-
edd The data descriptor to use when decoding. data_in The pointer to the data to decode into a struct. size_in The size of the data pointed to in bytes.
- Returns:
- NULL on failure, or a valid decoded struct pointer on success.
This function will decode a data structure that has been encoded using eet_data_descriptor_encode(), and return a data structure with all its elements filled out, if successful, or NULL on failure.
The data to be decoded is stored at the memory pointed to by data_in
, and is described by the descriptor pointed to by edd
. The data size is passed in as the value to size_in
, ande must be greater than 0 to succeed.
This function is useful for decoding data structures delivered to the application by means other than an eet file, such as an IPC or socket connection, raw files, shared memory etc.
Please see eet_data_read() for more information.
- See also:
- eet_data_descriptor_decode_cipher()
- Since:
- 1.0.0
References eet_data_descriptor_decode_cipher().
EAPI void eet_data_descriptor_element_add | ( | Eet_Data_Descriptor * | edd, | |
const char * | name, | |||
int | type, | |||
int | group_type, | |||
int | offset, | |||
int | count, | |||
const char * | counter_name, | |||
Eet_Data_Descriptor * | subtype | |||
) |
This function is an internal used by macros.
This function is used by macros EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and EET_DATA_DESCRIPTOR_ADD_LIST(). It is complex to use by hand and should be left to be used by the macros, and thus is not documented.
- Parameters:
-
edd The data descriptor handle to add element (member). name The name of element to be serialized. type The type of element to be serialized, like EET_T_INT. If EET_T_UNKNOW, then it is considered to be a group, list or hash. group_type If element type is EET_T_UNKNOW, then the group_type
will speficy if it is a list (EET_G_LIST), array (EET_G_ARRAY) and so on. If EET_G_UNKNOWN, then the member is a subtype (pointer to another type defined by another Eet_Data_Descriptor).offset byte offset inside the source memory to be serialized. count number of elements (if EET_G_ARRAY or EET_G_VAR_ARRAY). counter_name variable that defines the name of number of elements. subtype If contains a subtype, then its data descriptor.
- Since:
- 1.0.0
References eet_data_descriptor_element_add(), EET_G_LAST, EET_G_UNION, EET_G_UNKNOWN, EET_G_VAR_ARRAY, EET_G_VARIANT, EET_T_LAST, EET_T_NULL, EET_T_STRING, and EET_T_UNKNOW.
Referenced by eet_data_descriptor_element_add().
EAPI void* eet_data_descriptor_encode | ( | Eet_Data_Descriptor * | edd, | |
const void * | data_in, | |||
int * | size_ret | |||
) |
Encode a dsata struct to memory and return that encoded data.
- Parameters:
-
edd The data descriptor to use when encoding. data_in The pointer to the struct to encode into data. size_ret pointer to the an int to be filled with the decoded size.
- Returns:
- NULL on failure, or a valid encoded data chunk on success.
This function takes a data structutre in memory and encodes it into a serialised chunk of data that can be decoded again by eet_data_descriptor_decode(). This is useful for being able to transmit data structures across sockets, pipes, IPC or shared file mechanisms, without having to worry about memory space, machine type, endianess etc.
The parameter edd
must point to a valid data descriptor, and data_in
must point to the right data structure to encode. If not, the encoding may fail.
On success a non NULL valid pointer is returned and what size_ret
points to is set to the size of this decoded data, in bytes. When the encoded data is no longer needed, call free() on it. On failure NULL is returned and what size_ret
points to is set to 0.
Please see eet_data_write() for more information.
- See also:
- eet_data_descriptor_encode_cipher()
- Since:
- 1.0.0
References eet_data_descriptor_encode_cipher().
EAPI Eet_Data_Descriptor* eet_data_descriptor_file_new | ( | const Eet_Data_Descriptor_Class * | eddc | ) |
This function creates a new data descriptore and returns a handle to the new data descriptor.
On creation it will be empty, containing no contents describing anything other than the shell of the data structure.
- Parameters:
-
eddc The data descriptor to free.
You add structure members to the data descriptor using the macros EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and EET_DATA_DESCRIPTOR_ADD_LIST(), depending on what type of member you are adding to the description.
Once you have described all the members of a struct you want loaded, or saved eet can load and save those members for you, encode them into endian-independent serialised data chunks for transmission across a a network or more.
This function use str_direct_alloc and str_direct_free. It is useful when the eet_data you are reading come from a file and have a dictionnary. This will reduce memory use, improve the possibility for the OS to page this string out. But be carrefull all EET_T_STRING are pointer to a mmapped area and it will point to nowhere if you close the file. So as long as you use this strings, you need to have the Eet_File open.
- Since:
- 1.2.3
EAPI void eet_data_descriptor_free | ( | Eet_Data_Descriptor * | edd | ) |
This function frees a data descriptor when it is not needed anymore.
- Parameters:
-
edd The data descriptor to free.
This function takes a data descriptor handle as a parameter and frees all data allocated for the data descriptor and the handle itself. After this call the descriptor is no longer valid.
- Since:
- 1.0.0
EINA_DEPRECATED EAPI Eet_Data_Descriptor* eet_data_descriptor_new | ( | const char * | name, | |
int | size, | |||
Eet_Descriptor_List_Next_Callback | func_list_next, | |||
Eet_Descriptor_List_Append_Callback | func_list_append, | |||
Eet_Descriptor_List_Data_Callback | func_list_data, | |||
Eet_Descriptor_List_Free_Callback | func_list_free, | |||
Eet_Descriptor_Hash_Foreach_Callback | func_hash_foreach, | |||
Eet_Descriptor_Hash_Add_Callback | func_hash_add, | |||
Eet_Descriptor_Hash_Free_Callback | func_hash_free | |||
) |
Create a new empty data structure descriptor.
- Parameters:
-
name The string name of this data structure (most be a global constant and never change). size The size of the struct (in bytes). func_list_next The function to get the next list node. func_list_append The function to append a member to a list. func_list_data The function to get the data from a list node. func_list_free The function to free an entire linked list. func_hash_foreach The function to iterate through all hash table entries. func_hash_add The function to add a member to a hash table. func_hash_free The function to free an entire hash table.
- Returns:
- A new empty data descriptor.
This function creates a new data descriptore and returns a handle to the new data descriptor. On creation it will be empty, containing no contents describing anything other than the shell of the data structure.
You add structure members to the data descriptor using the macros EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and EET_DATA_DESCRIPTOR_ADD_LIST(), depending on what type of member you are adding to the description.
Once you have described all the members of a struct you want loaded, or saved eet can load and save those members for you, encode them into endian-independent serialised data chunks for transmission across a a network or more.
The function pointers to the list and hash table functions are only needed if you use those data types, else you can pass NULL instead.
- Since:
- 1.0.0
References _Eet_Data_Descriptor_Class::hash_add, _Eet_Data_Descriptor_Class::hash_foreach, _Eet_Data_Descriptor_Class::hash_free, _Eet_Data_Descriptor_Class::list_append, _Eet_Data_Descriptor_Class::list_data, _Eet_Data_Descriptor_Class::list_free, _Eet_Data_Descriptor_Class::list_next, _Eet_Data_Descriptor_Class::name, _Eet_Data_Descriptor_Class::size, and _Eet_Data_Descriptor_Class::version.
EAPI Eet_Data_Descriptor* eet_data_descriptor_stream_new | ( | const Eet_Data_Descriptor_Class * | eddc | ) |
This function creates a new data descriptore and returns a handle to the new data descriptor.
On creation it will be empty, containing no contents describing anything other than the shell of the data structure.
- Parameters:
-
eddc The data descriptor to free.
You add structure members to the data descriptor using the macros EET_DATA_DESCRIPTOR_ADD_BASIC(), EET_DATA_DESCRIPTOR_ADD_SUB() and EET_DATA_DESCRIPTOR_ADD_LIST(), depending on what type of member you are adding to the description.
Once you have described all the members of a struct you want loaded, or saved eet can load and save those members for you, encode them into endian-independent serialised data chunks for transmission across a a network or more.
This function specially ignore str_direct_alloc and str_direct_free. It is useful when the eet_data you are reading don't have a dictionnary like network stream or ipc. It also mean that all string will be allocated and duplicated in memory.
- Since:
- 1.2.3
EAPI int eet_data_dump | ( | Eet_File * | ef, | |
const char * | name, | |||
Eet_Dump_Callback | dumpfunc, | |||
void * | dumpdata | |||
) |
Dump an eet encoded data structure from an eet file into ascii text.
- Parameters:
-
ef A valid eet file handle. name Name of the entry. eg: "/base/file_i_want". dumpfunc The function to call passed a string when new data is converted to text dumpdata The data to pass to the dumpfunc
callback.
- Returns:
- 1 on success, 0 on failure
This function will take an open and valid eet file from eet_open() request the data encoded by eet_data_descriptor_encode() corresponding to the key name
and convert it into human readable ascii text. It does this by calling the dumpfunc
callback for all new text that is generated. This callback should append to any existing text buffer and will be passed the pointer dumpdata
as a parameter as well as a string with new text to be appended.
- See also:
- eet_data_dump_cipher()
- Since:
- 1.0.0
References eet_data_dump_cipher().
EAPI void* eet_data_read | ( | Eet_File * | ef, | |
Eet_Data_Descriptor * | edd, | |||
const char * | name | |||
) |
Read a data structure from an eet file and decodes it.
- Parameters:
-
ef The eet file handle to read from. edd The data descriptor handle to use when decoding. name The key the data is stored under in the eet file.
- Returns:
- A pointer to the decoded data structure.
This function decodes a data structure stored in an eet file, returning a pointer to it if it decoded successfully, or NULL on failure. This can save a programmer dozens of hours of work in writing configuration file parsing and writing code, as eet does all that work for the program and presents a program-friendly data structure, just as the programmer likes. Eet can handle members being added or deleted from the data in storage and safely zero-fills unfilled members if they were not found in the data. It checks sizes and headers whenever it reads data, allowing the programmer to not worry about corrupt data.
Once a data structure has been described by the programmer with the fields they wish to save or load, storing or retrieving a data structure from an eet file, or from a chunk of memory is as simple as a single function call.
- See also:
- eet_data_read_cipher()
- Since:
- 1.0.0
References eet_data_read_cipher().
EAPI int eet_data_text_dump | ( | const void * | data_in, | |
int | size_in, | |||
Eet_Dump_Callback | dumpfunc, | |||
void * | dumpdata | |||
) |
Dump an eet encoded data structure into ascii text.
- Parameters:
-
data_in The pointer to the data to decode into a struct. size_in The size of the data pointed to in bytes. dumpfunc The function to call passed a string when new data is converted to text dumpdata The data to pass to the dumpfunc
callback.
- Returns:
- 1 on success, 0 on failure
This function will take a chunk of data encoded by eet_data_descriptor_encode() and convert it into human readable ascii text. It does this by calling the dumpfunc
callback for all new text that is generated. This callback should append to any existing text buffer and will be passed the pointer dumpdata
as a parameter as well as a string with new text to be appended.
Example:
void output(void *data, const char *string) { printf("%s", string); } void dump(const char *file) { FILE *f; int len; void *data; f = fopen(file, "r"); fseek(f, 0, SEEK_END); len = ftell(f); rewind(f); data = malloc(len); fread(data, len, 1, f); fclose(f); eet_data_text_dump(data, len, output, NULL); }
- See also:
- eet_data_text_dump_cipher()
- Since:
- 1.0.0
References eet_data_text_dump_cipher().
EAPI void* eet_data_text_undump | ( | const char * | text, | |
int | textlen, | |||
int * | size_ret | |||
) |
Take an ascii encoding from eet_data_text_dump() and re-encode in binary.
- Parameters:
-
text The pointer to the string data to parse and encode. textlen The size of the string in bytes (not including 0 byte terminator). size_ret This gets filled in with the encoded data blob size in bytes.
- Returns:
- The encoded data on success, NULL on failure.
This function will parse the string pointed to by text
and return an encoded data lump the same way eet_data_descriptor_encode() takes an in-memory data struct and encodes into a binary blob. text
is a normal C string.
- See also:
- eet_data_text_undump_cipher()
- Since:
- 1.0.0
References eet_data_text_undump_cipher().
EAPI int eet_data_undump | ( | Eet_File * | ef, | |
const char * | name, | |||
const char * | text, | |||
int | textlen, | |||
int | compress | |||
) |
Take an ascii encoding from eet_data_dump() and re-encode in binary.
- Parameters:
-
ef A valid eet file handle. name Name of the entry. eg: "/base/file_i_want". text The pointer to the string data to parse and encode. textlen The size of the string in bytes (not including 0 byte terminator). compress Compression flags (1 == compress, 0 = don't compress).
- Returns:
- 1 on success, 0 on failure
This function will parse the string pointed to by text
, encode it the same way eet_data_descriptor_encode() takes an in-memory data struct and encodes into a binary blob.
The data (optionally compressed) will be in ram, pending a flush to disk (it will stay in ram till the eet file handle is closed though).
- See also:
- eet_data_undump_cipher()
- Since:
- 1.0.0
References eet_data_undump_cipher().
EAPI int eet_data_write | ( | Eet_File * | ef, | |
Eet_Data_Descriptor * | edd, | |||
const char * | name, | |||
const void * | data, | |||
int | compress | |||
) |
Write a data structure from memory and store in an eet file.
- Parameters:
-
ef The eet file handle to write to. edd The data descriptor to use when encoding. name The key to store the data under in the eet file. data A pointer to the data structure to ssave and encode. compress Compression flags for storage.
- Returns:
- bytes written on successful write, 0 on failure.
This function is the reverse of eet_data_read(), saving a data structure to an eet file.
- See also:
- eet_data_write_cipher()
- Since:
- 1.0.0
References eet_data_write_cipher().
EAPI Eina_Bool eet_eina_file_data_descriptor_class_set | ( | Eet_Data_Descriptor_Class * | eddc, | |
unsigned int | eddc_size, | |||
const char * | name, | |||
int | size | |||
) |
This function is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with a file.
- Parameters:
-
eddc The Eet_Data_Descriptor_Class you want to set. eddc_size The size of the Eet_Data_Descriptor_Class at the compilation time. name The name of the structure described by this class. size The size of the structure described by this class.
- Returns:
- EINA_TRUE if the structure was correctly set (The only reason that could make it fail is if you did give wrong parameter).
- Since:
- 1.2.3
References EET_DATA_DESCRIPTOR_CLASS_VERSION, eet_eina_stream_data_descriptor_class_set(), _Eet_Data_Descriptor_Class::hash_add, _Eet_Data_Descriptor_Class::str_direct_alloc, _Eet_Data_Descriptor_Class::str_direct_free, and _Eet_Data_Descriptor_Class::version.
EAPI Eina_Bool eet_eina_stream_data_descriptor_class_set | ( | Eet_Data_Descriptor_Class * | eddc, | |
unsigned int | eddc_size, | |||
const char * | name, | |||
int | size | |||
) |
This function is an helper that set all the parameter of an Eet_Data_Descriptor_Class correctly when you use Eina data type with a stream.
- Parameters:
-
eddc The Eet_Data_Descriptor_Class you want to set. name The name of the structure described by this class. eddc_size The size of the Eet_Data_Descriptor_Class at the compilation time. size The size of the structure described by this class.
- Returns:
- EINA_TRUE if the structure was correctly set (The only reason that could make it fail is if you did give wrong parameter).
- Since:
- 1.2.3
References _Eet_Data_Descriptor_Class::array_alloc, _Eet_Data_Descriptor_Class::array_free, EET_DATA_DESCRIPTOR_CLASS_VERSION, _Eet_Data_Descriptor_Class::hash_add, _Eet_Data_Descriptor_Class::hash_foreach, _Eet_Data_Descriptor_Class::hash_free, _Eet_Data_Descriptor_Class::list_append, _Eet_Data_Descriptor_Class::list_data, _Eet_Data_Descriptor_Class::list_free, _Eet_Data_Descriptor_Class::list_next, _Eet_Data_Descriptor_Class::mem_alloc, _Eet_Data_Descriptor_Class::mem_free, _Eet_Data_Descriptor_Class::name, _Eet_Data_Descriptor_Class::size, _Eet_Data_Descriptor_Class::str_alloc, _Eet_Data_Descriptor_Class::str_free, and _Eet_Data_Descriptor_Class::version.
Referenced by eet_eina_file_data_descriptor_class_set().